fence_intelmodular (8) - Linux Manuals

fence_intelmodular: Fence agent for Intel Modular

NAME

fence_intelmodular - Fence agent for Intel Modular

DESCRIPTION

fence_intelmodular is an I/O Fencing agent which can be used with Intel Modular device (tested on Intel MFSYS25, should work with MFSYS35 as well).

Note: Since firmware update version 2.7, SNMP v2 write support is removed, and replaced by SNMP v3 support. So agent now has default SNMP version 3. If you are using older firmware, please supply -d for command line and snmp_version option for your cluster.conf.

fence_intelmodular accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_intelmodular can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.intel.com

PARAMETERS

        

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 161)         

-d, --snmp-version=[version]

Specifies SNMP version to use (1,2c,3)         

-c, --community=[community]

Set the community string         

-B, --snmp-priv-prot=[prot]

Set privacy protocol (DES|AES)         

-n, --plug=[id]

Physical plug number, name of virtual machine or UUID This parameter is always required.         

-6, --inet6-only

Forces agent to use IPv6 addresses only         

-a, --ip=[ip]

IP Address or Hostname This parameter is always required.         

-P, --snmp-priv-passwd=[pass]

Set privacy protocol password         

-R, --snmp-priv-passwd-script

Script to run to retrieve privacy password         

-b, --snmp-auth-prot=[prot]

Set authentication protocol (MD5|SHA)         

-4, --inet4-only

Forces agent to use IPv4 addresses only         

-S, --password-script=[script]

Script to retrieve password         

-E, --snmp-sec-level=[level]

Set security level (noAuthNoPriv|authNoPriv|authPriv)         

-p, --password=[password]

Login password or passphrase         

-o, --action=[action]

Fencing Action (Default Value: reboot)         

-l, --username=[name]

Login Name         

-v, --verbose

Verbose mode         

-D, --debug-file=[debugfile]

Write debug information to given file         

-V, --version

Display version information and exit         

-h, --help

Display help and exit         

-C, --separator=[char]

Separator for CSV created by operation list (Default Value: ,)         

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)         

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)         

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)         

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)         

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

ACTIONS

        

on

Power on machine.         

off

Power off machine.         

reboot

Reboot machine.         

status

This returns the status of the plug/virtual machine.         

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.         

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.         

monitor

Check the health of fence device         

metadata

Display the XML metadata describing this resource.

STDIN PARAMETERS

        

ipport

TCP/UDP port to use for connection with device (Default Value: 161)         

snmp_version

Specifies SNMP version to use (1,2c,3)         

community

Set the community string         

snmp_priv_prot

Set privacy protocol (DES|AES)         

port

Physical plug number, name of virtual machine or UUID This parameter is always required.         

inet6_only

Forces agent to use IPv6 addresses only         

ipaddr

IP Address or Hostname This parameter is always required.         

snmp_priv_passwd

Set privacy protocol password         

snmp_priv_passwd_script

Script to run to retrieve privacy password         

snmp_auth_prot

Set authentication protocol (MD5|SHA)         

inet4_only

Forces agent to use IPv4 addresses only         

passwd_script

Script to retrieve password         

snmp_sec_level

Set security level (noAuthNoPriv|authNoPriv|authPriv)         

passwd

Login password or passphrase         

action

Fencing Action (Default Value: reboot)         

login

Login Name         

verbose

Verbose mode         

debug

Write debug information to given file         

version

Display version information and exit         

help

Display help and exit         

separator

Separator for CSV created by operation list (Default Value: ,)         

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)         

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)         

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)         

delay

Wait X seconds before fencing is started (Default Value: 0)         

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

retry_on

Count of attempts to retry power on (Default Value: 1)