fence_ilo4_ssh (8) - Linux Manuals

fence_ilo4_ssh: Fence agent for HP iLO over SSH

NAME

fence_ilo4_ssh - Fence agent for HP iLO over SSH

fence_ilo3_ssh - Fence agent for HP iLO3 over SSH (symlink)

fence_ilo4_ssh - Fence agent for HP iLO4 over SSH (symlink)

DESCRIPTION

fence_ilo_ssh is a fence agent that connects to iLO device. It logs into device via ssh and reboot a specified outlet.

fence_ilo4_ssh accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo4_ssh can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

        

-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 23)         
-a, --ip=[ip]
IP Address or Hostname         
-n, --plug=[ip]
IP address or hostname of fencing device (together with --port-as-ip)         
-x, --ssh
SSH connection         
-c, --command-prompt=[prompt]
Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])         
-6, --inet6-only
Forces agent to use IPv6 addresses only         
-k, --identity-file=[filename]
Identity file for ssh         
-4, --inet4-only
Forces agent to use IPv4 addresses only         
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)         
-S, --password-script=[script]
Script to retrieve password         
-p, --password=[password]
Login password or passphrase         
--ssh-options=[options]
SSH options to use         
-o, --action=[action]
Fencing Action (Default Value: reboot)         
-l, --username=[name]
Login Name This parameter is always required.         
-v, --verbose
Verbose mode         
-D, --debug-file=[debugfile]
Write debug information to given file         
-V, --version
Display version information and exit         
-h, --help
Display help and exit         
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 5)         
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)         
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)         
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)         
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
--port-as-ip
Make "port/plug" to be an alias to IP address         
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)

ACTIONS

        

on
Power on machine.         
off
Power off machine.         
reboot
Reboot machine.         
status
This returns the status of the plug/virtual machine.         
list
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.         
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.         
monitor
Check the health of fence device         
metadata
Display the XML metadata describing this resource.

STDIN PARAMETERS

        

ipport
TCP/UDP port to use for connection with device (Default Value: 23)         
ipaddr
IP Address or Hostname         
port
IP address or hostname of fencing device (together with --port-as-ip)         
secure
SSH connection         
cmd_prompt
Force Python regex for command prompt (Default Value: ['MP>', 'hpiLO->'])         
inet6_only
Forces agent to use IPv6 addresses only         
identity_file
Identity file for ssh         
inet4_only
Forces agent to use IPv4 addresses only         
method
Method to fence (onoff|cycle) (Default Value: onoff)         
passwd_script
Script to retrieve password         
passwd
Login password or passphrase         
ssh_options
SSH options to use         
action
Fencing Action (Default Value: reboot)         
login
Login Name This parameter is always required.         
verbose
Verbose mode         
debug
Write debug information to given file         
version
Display version information and exit         
help
Display help and exit         
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 5)         
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)         
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)         
delay
Wait X seconds before fencing is started (Default Value: 0)         
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)         
port_as_ip
Make "port/plug" to be an alias to IP address         
retry_on
Count of attempts to retry power on (Default Value: 1)

Pages related to fence_ilo4_ssh