fence_ilo (8) - Linux Manuals

fence_ilo: Fence agent for HP iLO

NAME

fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream.

fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.hp.com

PARAMETERS

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 443)         

-t, --notls

Disable TLS negotiation, force SSL 3.0         

-r, --ribcl-version=[version]

Force ribcl version to use         

--ssl-secure

SSL connection with verifying fence device's certificate         

-o, --action=[action]

Fencing Action (Default Value: reboot)         

-6, --inet6-only

Forces agent to use IPv6 addresses only         

-a, --ip=[ip]

IP Address or Hostname         

-n, --plug=[ip]

IP address or hostname of fencing device (together with --port-as-ip)         

-4, --inet4-only

Forces agent to use IPv4 addresses only         

-S, --password-script=[script]

Script to retrieve password         

--tls1.0

Disable TLS negotiaton, force TLS 1.0         

-p, --password=[password]

Login password or passphrase         

-z, --ssl

SSL connection (Default Value: 1)         

--ssl-insecure

SSL connection without verifying fence device's certificate         

-l, --username=[name]

Login Name This parameter is always required.         

-v, --verbose

Verbose mode         

-D, --debug-file=[debugfile]

Write debug information to given file         

-V, --version

Display version information and exit         

-h, --help

Display help and exit         

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)         

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 10)         

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)         

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)         

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

--port-as-ip

Make "port/plug" to be an alias to IP address         

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 3)

ACTIONS

on

Power on machine.         

off

Power off machine.         

reboot

Reboot machine.         

status

This returns the status of the plug/virtual machine.         

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.         

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.         

monitor

Check the health of fence device         

metadata

Display the XML metadata describing this resource.

STDIN PARAMETERS

ipport

TCP/UDP port to use for connection with device (Default Value: 443)         

notls

Disable TLS negotiation, force SSL 3.0         

ribcl

Force ribcl version to use         

ssl_secure

SSL connection with verifying fence device's certificate         

action

Fencing Action (Default Value: reboot)         

inet6_only

Forces agent to use IPv6 addresses only         

ipaddr

IP Address or Hostname         

port

IP address or hostname of fencing device (together with --port-as-ip)         

inet4_only

Forces agent to use IPv4 addresses only         

passwd_script

Script to retrieve password         

tls1.0

Disable TLS negotiaton, force TLS 1.0         

passwd

Login password or passphrase         

ssl

SSL connection (Default Value: 1)         

ssl_insecure

SSL connection without verifying fence device's certificate         

login

Login Name This parameter is always required.         

verbose

Verbose mode         

debug

Write debug information to given file         

version

Display version information and exit         

help

Display help and exit         

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)         

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 10)         

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)         

delay

Wait X seconds before fencing is started (Default Value: 0)         

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

port_as_ip

Make "port/plug" to be an alias to IP address         

retry_on

Count of attempts to retry power on (Default Value: 3)