fence_apc (8) - Linux Manuals

fence_apc: Fence agent for APC over telnet/ssh

NAME

DESCRIPTION

fence_apc is an I/O Fencing agent which can be used with the APC network power switch. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

fence_apc accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_apc can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.apc.com

PARAMETERS

-u, --ipport=[port]

TCP/UDP port to use for connection with device (Default Value: 23)         

-a, --ip=[ip]

IP Address or Hostname This parameter is always required.         

-n, --plug=[id]

Physical plug number, name of virtual machine or UUID This parameter is always required.         

-x, --ssh

SSH connection         

-c, --command-prompt=[prompt]

Force Python regex for command prompt (Default Value: ['', 'pc>'])         

-6, --inet6-only

Forces agent to use IPv6 addresses only         

-k, --identity-file=[filename]

Identity file for ssh         

-4, --inet4-only

Forces agent to use IPv4 addresses only         

-S, --password-script=[script]

Script to retrieve password         

-p, --password=[password]

Login password or passphrase         

--ssh-options=[options]

SSH options to use (Default Value: -1 -c blowfish)         

-s, --switch=[id]

Physical switch number on device         

-o, --action=[action]

Fencing Action (Default Value: reboot)         

-l, --username=[name]

Login Name This parameter is always required.         

-v, --verbose

Verbose mode         

-D, --debug-file=[debugfile]

Write debug information to given file         

-V, --version

Display version information and exit         

-h, --help

Display help and exit         

-C, --separator=[char]

Separator for CSV created by operation list (Default Value: ,)         

--power-wait=[seconds]

Wait X seconds after issuing ON/OFF (Default Value: 0)         

--login-timeout=[seconds]

Wait X seconds for cmd prompt after login (Default Value: 5)         

--power-timeout=[seconds]

Test X seconds for status change after ON/OFF (Default Value: 20)         

--delay=[seconds]

Wait X seconds before fencing is started (Default Value: 0)         

--shell-timeout=[seconds]

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

--retry-on=[attempts]

Count of attempts to retry power on (Default Value: 1)

ACTIONS

on

Power on machine.         

off

Power off machine.         

reboot

Reboot machine.         

status

This returns the status of the plug/virtual machine.         

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.         

list-status

List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.         

monitor

Check the health of fence device         

metadata

Display the XML metadata describing this resource.

STDIN PARAMETERS

ipport

TCP/UDP port to use for connection with device (Default Value: 23)         

ipaddr

IP Address or Hostname This parameter is always required.         

port

Physical plug number, name of virtual machine or UUID This parameter is always required.         

secure

SSH connection         

cmd_prompt

Force Python regex for command prompt (Default Value: ['', 'pc>'])         

inet6_only

Forces agent to use IPv6 addresses only         

identity_file

Identity file for ssh         

inet4_only

Forces agent to use IPv4 addresses only         

passwd_script

Script to retrieve password         

passwd

Login password or passphrase         

ssh_options

SSH options to use (Default Value: -1 -c blowfish)         

switch

Physical switch number on device         

action

Fencing Action (Default Value: reboot)         

login

Login Name This parameter is always required.         

verbose

Verbose mode         

debug

Write debug information to given file         

version

Display version information and exit         

help

Display help and exit         

separator

Separator for CSV created by operation list (Default Value: ,)         

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)         

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)         

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)         

delay

Wait X seconds before fencing is started (Default Value: 0)         

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)         

retry_on

Count of attempts to retry power on (Default Value: 1)