btrfs-filesystem (8) - Linux Manuals
btrfs-filesystem: command group that primarily does work on the whole filesystems
NAME
btrfs-filesystem - command group that primarily does work on the whole filesystems
SYNOPSIS
btrfs filesystem <subcommand> <args>
DESCRIPTION
btrfs filesystem is used to perform several whole filesystem level tasks, including all the regular filesystem operations like resizing, space stats, label setting/getting, and defragmentation. There are other whole filesystem tasks like scrub or balance that are grouped in separate commands.
SUBCOMMAND
df [options] <path>
-
Show a terse summary information about allocation of block group types of a given mount point. The original purpose of this command was a debugging helper. The output needs to be further interpreted and is not suitable for quick overview.
An example with description:
- • device size: 1.9TiB, one device, no RAID
- • filesystem size: 1.9TiB
- • created with: mkfs.btrfs -d single -m single
-
$ btrfs filesystem df /path Data, single: total=1.15TiB, used=1.13TiB System, single: total=32.00MiB, used=144.00KiB Metadata, single: total=12.00GiB, used=6.45GiB GlobalReserve, single: total=512.00MiB, used=0.00B
- • Data, System and Metadata are separate block group types. GlobalReserve is an artificial and internal emergency space, see below.
- • single --- the allocation profile, defined at mkfs time
- • total --- sum of space reserved for all allocation profiles of the given type, ie. all Data/single. Note that it's not total size of filesystem.
- • used --- sum of used space of the above, ie. file extents, metadata blocks
GlobalReserve is an artificial and internal emergency space. It is used eg. when the filesystem is full. Its total size is dynamic based on the filesystem size, usually not larger than 512MiB, used may fluctuate.
The GlobalReserve is a portion of Metadata. In case the filesystem metadata is exhausted, GlobalReserve/total + Metadata/used = Metadata/total. Otherwise there appears to be some unused space of Metadata.
Options
-b|--raw
- raw numbers in bytes, without the B suffix
-h|--human-readable
- print human friendly numbers, base 1024, this is the default
-H
- print human friendly numbers, base 1000
--iec
- select the 1024 base for the following options, according to the IEC standard
--si
- select the 1000 base for the following options, according to the SI standard
-k|--kbytes
- show sizes in KiB, or kB with --si
-m|--mbytes
- show sizes in MiB, or MB with --si
-g|--gbytes
- show sizes in GiB, or GB with --si
-t|--tbytes
-
show sizes in TiB, or TB with --si
If conflicting options are passed, the last one takes precedence.
defragment [options] <file>|<dir> [<file>|<dir>...]
-
Defragment file data on a mounted filesystem. Requires kernel 2.6.33 and newer.
If -r is passed, files in dir will be defragmented recursively (not descending to subvolumes and mount points). The start position and the number of bytes to defragment can be specified by start and length using -s and -l options below. Extents bigger than value given by -t will be skipped, otherwise this value is used as a target extent size, but is only advisory and may not be reached if the free space is too fragmented. Use 0 to take the kernel default, which is 256kB but may change in the future. You can also turn on compression in defragment operations.
-
Warning
Defragmenting with Linux kernel versions < 3.9 or ≥ 3.14-rc2 as well as with Linux stable kernel versions ≥ 3.10.31, ≥ 3.12.12 or ≥ 3.13.4 will break up the reflinks of COW data (for example files copied with cp --reflink, snapshots or de-duplicated data). This may cause considerable increase of space usage depending on the broken up reflinks.
-
Note
Directory arguments without -r do not defragment files recursively but will defragment certain internal trees (extent tree and the subvolume tree). This has been confusing and could be removed in the future.
Options
-v
- be verbose, print file names as they're submitted for defragmentation
-c[<algo>]
- compress file contents while defragmenting. Optional argument selects the compression algorithm, zlib (default), lzo or zstd. Currently it's not possible to select no compression. See also section EXAMPLES.
-r
- defragment files recursively in given directories, does not descend to subvolumes or mount points
-f
-
flush data for each file before going to the next file.
This will limit the amount of dirty data to current file, otherwise the amount accumulates from several files and will increase system load. This can also lead to ENOSPC if there's too much dirty data to write and it's not possible to make the reservations for the new data (ie. how the COW design works).
-s <start>[kKmMgGtTpPeE]
- defragmentation will start from the given offset, default is beginning of a file
-l <len>[kKmMgGtTpPeE]
- defragment only up to len bytes, default is the file size
-t <size>[kKmMgGtTpPeE]
-
target extent size, do not touch extents bigger than
size, default: 32M
The value is only advisory and the final size of the extents may differ, depending on the state of the free space and fragmentation or other internal logic. Reasonable values are from tens to hundreds of megabytes.
-
du [options] <path> [<path>..]
-
Calculate disk usage of the target files using FIEMAP. For individual files, it will report a count of total bytes, and exclusive (not shared) bytes. We also calculate a
set shared
value which is described below.
Each argument to btrfs filesystem du will have a set shared value calculated for it. We define each set as those files found by a recursive search of an argument (recursion descends to subvolumes but not mount points). The set shared value then is a sum of all shared space referenced by the set.
set shared takes into account overlapping shared extents, hence it isn't as simple as adding up shared extents.
Options
-s|--summarize
- display only a total for each argument
--raw
- raw numbers in bytes, without the B suffix.
--human-readable
- print human friendly numbers, base 1024, this is the default
--iec
- select the 1024 base for the following options, according to the IEC standard.
--si
- select the 1000 base for the following options, according to the SI standard.
--kbytes
- show sizes in KiB, or kB with --si.
--mbytes
- show sizes in MiB, or MB with --si.
--gbytes
- show sizes in GiB, or GB with --si.
--tbytes
- show sizes in TiB, or TB with --si.
label [<device>|<mountpoint>] [<newlabel>]
-
Show or update the label of a filesystem. This works on a mounted filesystem or a filesystem image.
The newlabel argument is optional. Current label is printed if the argument is omitted.
-
Note
the maximum allowable length shall be less than 256 chars and must not contain a newline. The trailing newline is stripped automatically.
-
resize [<devid>:][+/-]<size>[kKmMgGtTpPeE]|[<devid>:]max <path>
-
Resize a mounted filesystem identified by
path. A particular device can be resized by specifying a
devid.
-
Warning
If path is a file containing a BTRFS image then resize does not work as expected and does not resize the image. This would resize the underlying filesystem instead.
If max is passed, the filesystem will occupy all available space on the device respecting devid (remember, devid 1 by default).
The resize command does not manipulate the size of underlying partition. If you wish to enlarge/reduce a filesystem, you must make sure you can expand the partition before enlarging the filesystem and shrink the partition after reducing the size of the filesystem. This can done using fdisk(8) or parted(8) to delete the existing partition and recreate it with the new desired size. When recreating the partition make sure to use the same starting partition offset as before.
Growing is usually instant as it only updates the size. However, shrinking could take a long time if there are data in the device area that's beyond the new end. Relocation of the data takes time.
See also section EXAMPLES.
-
show [options] [<path>|<uuid>|<device>|<label>]
-
Show the btrfs filesystem with some additional info about devices and space allocation.
If no option none of path/uuid/device/label is passed, information about all the BTRFS filesystems is shown, both mounted and unmounted.
Options
-m|--mounted
- probe kernel for mounted BTRFS filesystems
-d|--all-devices
- scan all devices under /dev, otherwise the devices list is extracted from the /proc/partitions file. This is a fallback option if there's no device node manager (like udev) available in the system.
--raw
- raw numbers in bytes, without the B suffix
--human-readable
- print human friendly numbers, base 1024, this is the default
--iec
- select the 1024 base for the following options, according to the IEC standard
--si
- select the 1000 base for the following options, according to the SI standard
--kbytes
- show sizes in KiB, or kB with --si
--mbytes
- show sizes in MiB, or MB with --si
--gbytes
- show sizes in GiB, or GB with --si
--tbytes
- show sizes in TiB, or TB with --si
sync <path>
- Force a sync of the filesystem at path. This is done via a special ioctl and will also trigger cleaning of deleted subvolumes. Besides that it's equivalent to the sync(1) command.
usage [options] <path> [<path>...]
-
Show detailed information about internal filesystem usage. This is supposed to replace the
btrfs filesystem df
command in the long run.
The level of detail can differ if the command is run under a regular or the root user (due to use of restricted ioctl). For both there's a summary section with information about space usage:
-
$ btrfs filesystem usage /path WARNING: cannot read detailed chunk info, RAID5/6 numbers will be incorrect, run as root Overall: Device size: 1.82TiB Device allocated: 1.17TiB Device unallocated: 669.99GiB Device missing: 0.00B Used: 1.14TiB Free (estimated): 692.57GiB (min: 692.57GiB) Data ratio: 1.00 Metadata ratio: 1.00 Global reserve: 512.00MiB (used: 0.00B)
The root user will also see stats broken down by block group types:
-
Data,single: Size:1.15TiB, Used:1.13TiB /dev/sdb 1.15TiB Metadata,single: Size:12.00GiB, Used:6.45GiB /dev/sdb 12.00GiB System,single: Size:32.00MiB, Used:144.00KiB /dev/sdb 32.00MiB Unallocated: /dev/sdb 669.99GiB
Options
-b|--raw
- raw numbers in bytes, without the B suffix
-h|--human-readable
- print human friendly numbers, base 1024, this is the default
-H
- print human friendly numbers, base 1000
--iec
- select the 1024 base for the following options, according to the IEC standard
--si
- select the 1000 base for the following options, according to the SI standard
-k|--kbytes
- show sizes in KiB, or kB with --si
-m|--mbytes
- show sizes in MiB, or MB with --si
-g|--gbytes
- show sizes in GiB, or GB with --si
-t|--tbytes
- show sizes in TiB, or TB with --si
-T
-
show data in tabular format
If conflicting options are passed, the last one takes precedence.
-
EXAMPLES
$ btrfs filesystem defrag -v -r dir/
Recursively defragment files under dir/, print files as they are processed. The file names will be printed in batches, similarly the amount of data triggered by defragmentation will be proportional to last N printed files. The system dirty memory throttling will slow down the defragmentation but there can still be a lot of IO load and the system may stall for a moment.
$ btrfs filesystem defrag -v -r -f dir/
Recursively defragment files under dir/, be verbose and wait until all blocks are flushed before processing next file. You can note slower progress of the output and lower IO load (proportional to currently defragmented file).
$ btrfs filesystem defrag -v -r -f -clzo dir/
Recursively defragment files under dir/, be verbose, wait until all blocks are flushed and force file compression.
$ btrfs filesystem defrag -v -r -t 64M dir/
Recursively defragment files under dir/, be verbose and try to merge extents to be about 64MiB. As stated above, the success rate depends on actual free space fragmentation and the final result is not guaranteed to meet the target even if run repeatedly.
$ btrfs filesystem resize -1G /path
$ btrfs filesystem resize 1:-1G /path
Shrink size of the filesystem's device id 1 by 1GiB. The first syntax expects a device with id 1 to exist, otherwise fails. The second is equivalent and more explicit. For a single-device filesystem it's typically not necessary to specify the devid though.
$ btrfs filesystem resize max /path
$ btrfs filesystem resize 1:max /path
Let's assume that devid 1 exists and the filesystem does not occupy the whole block device, eg. it has been enlarged and we want to grow the filesystem. By simply using max as size we will achieve that.
-
Note
There are two ways to minimize the filesystem on a given device. The btrfs inspect-internal min-dev-size command, or iteratively shrink in steps.
EXIT STATUS
btrfs filesystem returns a zero exit status if it succeeds. Non zero is returned in case of failure.
AVAILABILITY
btrfs is part of btrfs-progs. Please refer to the btrfs wiki m[blue]http://btrfs.wiki.kernel.orgm[] for further details.