ocf_heartbeat_IPaddr2 (7) - Linux Manuals

If used as a clone, you should explicitly set clone-node-max >= 2, and/or clone-max < number of nodes. In case of node failure, clone instances need to be re-allocated on surviving nodes. This would not be possible if there is already an instance on those nodes, and clone-node-max=1 (which is the default).

SUPPORTED PARAMETERS

ip

The IPv4 (dotted quad notation) or IPv6 address (colon hexadecimal notation) example IPv4 "192.168.1.1". example IPv6 "2001:db8:DC28:0:0:FC57:D4C8:1FFF".

(unique, required, string, no default)

nic

The base network interface on which the IP address will be brought online. If left empty, the script will try and determine this from the routing table.

Do NOT specify an alias interface in the form eth0:1 or anything here; rather, specify the base interface only. If you want a label, see the iflabel parameter.

Prerequisite:

There must be at least one static IP address, which is not managed by the cluster, assigned to the network interface. If you can not assign any static IP address on the interface, modify this kernel parameter:

sysctl -w net.ipv4.conf.all.promote_secondaries=1 # (or per device)

(optional, string, no default)

cidr_netmask

The netmask for the interface in CIDR format (e.g., 24 and not 255.255.255.0)

If unspecified, the script will also try to determine this from the routing table.

(optional, string, no default)

broadcast

Broadcast address associated with the IP. If left empty, the script will determine this from the netmask.

(optional, string, no default)

iflabel

You can specify an additional label for your IP address here. This label is appended to your interface name.

A label can be specified in nic parameter but it is deprecated. If a label is specified in nic name, this parameter has no effect.

(optional, string, no default)

lvs_support

Enable support for LVS Direct Routing configurations. In case a IP address is stopped, only move it to the loopback device to allow the local node to continue to service requests, but no longer advertise it on the network.

Notes for IPv6: It is not necessary to enable this option on IPv6. Instead, enable 'lvs_ipv6_addrlabel' option for LVS-DR usage on IPv6.

(optional, boolean, default false)

lvs_ipv6_addrlabel

Enable adding IPv6 address label so IPv6 traffic originating from the address's interface does not use this address as the source. This is necessary for LVS-DR health checks to realservers to work. Without it, the most recently added IPv6 address (probably the address added by IPaddr2) will be used as the source address for IPv6 traffic from that interface and since that address exists on loopback on the realservers, the realserver response to pings/connections will never leave its loopback. See RFC3484 for the detail of the source address selection.

See also 'lvs_ipv6_addrlabel_value' parameter.

(optional, boolean, default false)

lvs_ipv6_addrlabel_value

Specify IPv6 address label value used when 'lvs_ipv6_addrlabel' is enabled. The value should be an unused label in the policy table which is shown by 'ip addrlabel list' command. You would rarely need to change this parameter.

(optional, integer, default 99)

mac

Set the interface MAC address explicitly. Currently only used in case of the Cluster IP Alias. Leave empty to chose automatically.

(optional, string, no default)

clusterip_hash

Specify the hashing algorithm used for the Cluster IP functionality.

(optional, string, default "sourceip-sourceport")

unique_clone_address

If true, add the clone ID to the supplied value of IP to create a unique address to manage

(optional, boolean, default false)

arp_interval

Specify the interval between unsolicited ARP packets in milliseconds.

(optional, integer, default 200)

arp_count

Number of unsolicited ARP packets to send.

(optional, integer, default 5)

arp_bg

Whether or not to send the ARP packets in the background.

(optional, string, default "true")

arp_mac

MAC address to send the ARP packets to.

You really shouldn't be touching this.

(optional, string, default "ffffffffffff")

arp_sender

The program to send ARP packets with on start. For infiniband interfaces, default is ipoibarping. If ipoibarping is not available, set this to send_arp.

(optional, string, no default)

flush_routes

Flush the routing table on stop. This is for applications which use the cluster IP address and which run on the same physical host that the IP address lives on. The Linux kernel may force that application to take a shortcut to the local loopback interface, instead of the interface the address is really bound to. Under those circumstances, an application may, somewhat unexpectedly, continue to use connections for some time even after the IP address is deconfigured. Set this parameter in order to immediately disable said shortcut when the IP address goes away.

(optional, boolean, default false)

preferred_lft

For IPv6, set the preferred lifetime of the IP address. This can be used to ensure that the created IP address will not be used as a source address for routing. Expects a value as specified in section 5.5.4 of RFC 4862.

(optional, string, default "forever")

SUPPORTED ACTIONS

This resource agent supports the following actions (operations):

start

Starts the resource. Suggested minimum timeout: 20s.

stop

Stops the resource. Suggested minimum timeout: 20s.

status

Performs a status check. Suggested minimum timeout: 20s. Suggested interval: 10s.

monitor

Performs a detailed status check. Suggested minimum timeout: 20s. Suggested interval: 10s.

meta-data

Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5s.

validate-all

Performs a validation of the resource configuration. Suggested minimum timeout: 20s.

EXAMPLE CRM SHELL

The following is an example configuration for a IPaddr2 resource using the crm(8) shell:

primitive p_IPaddr2 ocf:heartbeat:IPaddr2 \
  params \
    ip=string \
  op monitor depth="0" timeout="20s" interval="10s" 

EXAMPLE PCS

The following is an example configuration for a IPaddr2 resource using pcs(8)

pcs resource create p_IPaddr2 ocf:heartbeat:IPaddr2 \
  ip=string \
  op monitor depth="0" timeout="20s" interval="10s" 

AUTHOR

Linux-HA contributors (see the resource agent source for information about individual authors)