xfsctl (3) - Linux Manuals

DESCRIPTION

File Operations

XFS_IOC_ALLOCSP
XFS_IOC_ALLOCSP64
XFS_IOC_FREESP

XFS_IOC_FREESP64

Alter storage space associated with a section of the ordinary file specified. The section is specified by a variable of type xfs_flock64_t, pointed to by the final argument. The data type xfs_flock64_t contains the following members: l_whence is 0, 1, or 2 to indicate that the relative offset l_start will be measured from the start of the file, the current position, or the end of the file, respectively (i.e., l_start is the offset from the position specified in l_whence). If the offset specified is before the current end of file, any data previously written into this section is no longer accessible. If the offset specified is beyond the current end of file, the file is grown and filled with zeroes. The l_len field is currently ignored, and should be set to zero.

XFS_IOC_ALLOCSP, XFS_IOC_ALLOCSP64, XFS_IOC_FREESP and XFS_IOC_FREESP64 operations are all identical.

XFS_IOC_FSSETDM

Set the di_dmevmask and di_dmstate fields in an XFS on-disk inode. The only legitimate values for these fields are those previously returned in the bs_dmevmask and bs_dmstate fields of the bulkstat structure. The data referred to by the final argument is a struct fsdmidata. This structure's members are fsd_dmevmask and fsd_dmstate. The di_dmevmask field is set to the value in fsd_dmevmask. The di_dmstate field is set to the value in fsd_dmstate. This command is restricted to root or to processes with device management capabilities. Its sole purpose is to allow backup and restore programs to restore the aforementioned critical on-disk inode fields.

XFS_IOC_DIOINFO

Get information required to perform direct I/O on the specified file descriptor. Direct I/O is performed directly to and from a user's data buffer. Since the kernel's buffer cache is no longer between the two, the user's data buffer must conform to the same type of constraints as required for accessing a raw disk partition. The final argument points to a variable of type struct dioattr, which contains the following members: d_mem is the memory alignment requirement of the user's data buffer. d_miniosz specifies block size, minimum I/O request size, and I/O alignment. The size of all I/O requests must be a multiple of this amount and the value of the seek pointer at the time of the I/O request must also be an integer multiple of this amount. d_maxiosz is the maximum I/O request size which can be performed on the file descriptor. If an I/O request does not meet these constraints, the read(2) or write(2) will fail with EINVAL. All I/O requests are kept consistent with any data brought into the cache with an access through a non-direct I/O file descriptor.

XFS_IOC_FSGETXATTR

Get additional attributes associated with files in XFS file systems. The final argument points to a variable of type struct fsxattr, whose fields include: fsx_xflags (extended flag bits), fsx_extsize (nominal extent size in file system blocks), fsx_nextents (number of data extents in the file). A fsx_extsize value returned indicates that a preferred extent size was previously set on the file, a fsx_extsize of zero indicates that the defaults for that filesystem will be used. Currently the meaningful bits for the fsx_xflags field are:

Bit 0 (0x1) - XFS_XFLAG_REALTIME

The file is a realtime file.

Bit 1 (0x2) - XFS_XFLAG_PREALLOC

The file has preallocated space.

Bit 3 (0x8) - XFS_XFLAG_IMMUTABLE

The file is immutable - it cannot be modified, deleted or renamed, no link can be created to this file and no data can be written to the file. Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE capability can set or clear this flag.

Bit 4 (0x10) - XFS_XFLAG_APPEND

The file is append-only - it can only be open in append mode for writing. Only the superuser or a process possessing the CAP_LINUX_IMMUTABLE capability can set or clear this flag.

Bit 5 (0x20) - XFS_XFLAG_SYNC

All writes to the file are synchronous.

Bit 6 (0x40) - XFS_XFLAG_NOATIME

When the file is accessed, its atime record is not modified.

Bit 7 (0x80) - XFS_XFLAG_NODUMP

The file should be skipped by backup utilities.

Bit 8 (0x100) - XFS_XFLAG_RTINHERIT

Realtime inheritance bit - new files created in the directory will be automatically realtime, and new directories created in the directory will inherit the inheritance bit.

Bit 9 (0x200) - XFS_XFLAG_PROJINHERIT

Project inheritance bit - new files and directories created in the directory will inherit the parents project ID. New directories also inherit the project inheritance bit.

Bit 10 (0x400) - XFS_XFLAG_NOSYMLINKS

Can only be set on a directory and disallows creation of symbolic links in that directory.

Bit 11 (0x800) - XFS_XFLAG_EXTSIZE

Extent size bit - if a basic extent size value is set on the file then the allocator will allocate in multiples of the set size for this file (see XFS_IOC_FSSETXATTR below).

Bit 12 (0x1000) - XFS_XFLAG_EXTSZINHERIT

Extent size inheritance bit - new files and directories created in the directory will inherit the parents basic extent size value (see XFS_IOC_FSSETXATTR below). Can only be set on a directory.

Bit 13 (0x2000) - XFS_XFLAG_NODEFRAG

No defragment file bit - the file should be skipped during a defragmentation operation. When applied to a directory, new files and directories created will inherit the no-defrag bit.

Bit 14 (0x4000) - XFS_XFLAG_FILESTREAM

Filestream allocator bit - allows a directory to reserve an allocation group for exclusive use by files created within that directory. Files being written in other directories will not use the same allocation group and so files within different directories will not interleave extents on disk. The reservation is only active while files are being created and written into the directory.

Bit 31 (0x80000000) - XFS_XFLAG_HASATTR

The file has extended attributes associated with it.

XFS_IOC_FSGETXATTRA

Identical to XFS_IOC_FSGETXATTR except that the fsx_nextents field contains the number of attribute extents in the file.

XFS_IOC_FSSETXATTR

Set additional attributes associated with files in XFS file systems. The final argument points to a variable of type struct fsxattr, but only the following fields are used in this call: fsx_xflags, fsx_extsize and fsx_projid. The fsx_xflags realtime file bit and the file's extent size may be changed only when the file is empty, except in the case of a directory where the extent size can be set at any time (this value is only used for regular file allocations, so should only be set on a directory in conjunction with the XFS_XFLAG_EXTSZINHERIT flag).

XFS_IOC_GETBMAP

Get the block map for a segment of a file in an XFS file system. The final argument points to an arry of variables of type struct getbmap. All sizes and offsets in the structure are in units of 512 bytes. The structure fields include: bmv_offset (file offset of segment), bmv_block (starting block of segment), bmv_length (length of segment), bmv_count (number of array entries, including the first), and bmv_entries (number of entries filled in). The first structure in the array is a header, and the remaining structures in the array contain block map information on return. The header controls iterative calls to the XFS_IOC_GETBMAP command. The caller fills in the bmv_offset and bmv_length fields of the header to indicate the area of interest in the file, and fills in the bmv_count field to indicate the length of the array. If the bmv_length value is set to -1 then the length of the interesting area is the rest of the file. On return from a call, the header is updated so that the command can be reused to obtain more information, without re-initializing the structures. Also on return, the bmv_entries field of the header is set to the number of array entries actually filled in. The non-header structures will be filled in with bmv_offset, bmv_block, and bmv_length. If a region of the file has no blocks (is a hole in the file) then the bmv_block field is set to -1.

XFS_IOC_GETBMAPA

Identical to XFS_IOC_GETBMAP except that information about the attribute fork of the file is returned.

XFS_IOC_RESVSP

XFS_IOC_RESVSP64

This command is used to allocate space to a file. A range of bytes is specified using a pointer to a variable of type xfs_flock64_t in the final argument. The blocks are allocated, but not zeroed, and the file size does not change. If the XFS filesystem is configured to flag unwritten file extents, performance will be negatively affected when writing to preallocated space, since extra filesystem transactions are required to convert extent flags on the range of the file written. If xfs_info(8) reports unwritten=1, then the filesystem was made to flag unwritten extents.

XFS_IOC_UNRESVSP

XFS_IOC_UNRESVSP64

This command is used to free space from a file. A range of bytes is specified using a pointer to a variable of type xfs_flock64_t in the final argument. Partial filesystem blocks are zeroed, and whole filesystem blocks are removed from the file. The file size does not change.

XFS_IOC_ZERO_RANGE

This command is used to convert a range of a file to zeros without issuing data IO. A range of bytes is specified using a pointer to a variable of type xfs_flock64_t in the final argument. Blocks are preallocated for regions that span holes in the file, and the entire range is converted to unwritten extents. This operation is a fast method of overwriting any from the range specified with zeros without removing any blocks or having to write zeros to disk. Any subsequent read in the given range will return zeros until new data is written. This functionality requires filesystems to support unwritten extents. If xfs_info(8) reports unwritten=1, then the filesystem was made to flag unwritten extents.

XFS_IOC_PATH_TO_HANDLE
XFS_IOC_PATH_TO_FSHANDLE
XFS_IOC_FD_TO_HANDLE
XFS_IOC_OPEN_BY_HANDLE
XFS_IOC_READLINK_BY_HANDLE
XFS_IOC_ATTR_LIST_BY_HANDLE
XFS_IOC_ATTR_MULTI_BY_HANDLE

XFS_IOC_FSSETDM_BY_HANDLE

These are all interfaces that are used to implement various libhandle functions (see open_by_handle(3)). They are all subject to change and should not be called directly by applications.

Filesystem Operations

XFS_IOC_FSINUMBERS

This interface is used to extract a list of valid inode numbers from an XFS filesystem. It is intended to be called iteratively, to obtain the entire set of inodes. The information is passed in and out via a structure of type xfs_fsop_bulkreq_t pointed to by the final argument. lastip is a pointer to a variable containing the last inode number returned, initially it should be zero. icount is the size of the array of structures specified by ubuffer. ubuffer is the address of an array of structures, of type xfs_inogrp_t. This structure has the following elements: xi_startino (starting inode number), xi_alloccount (count of bits set in xi_allocmask), and xi_allocmask (mask of allocated inodes in this group). The bitmask is 64 bits long, and the least significant bit corresponds to inode xi_startino. Each bit is set if the corresponding inode is in use. ocount is a pointer to a count of returned values, filled in by the call. An output ocount value of zero means that the inode table has been exhausted.

XFS_IOC_FSBULKSTAT

This interface is used to extract inode information (stat information) "in bulk" from a filesystem. It is intended to be called iteratively, to obtain information about the entire set of inodes in a filesystem. The information is passed in and out via a structure of type xfs_fsop_bulkreq_t pointed to by the final argument. lastip is a pointer to a variable containing the last inode number returned, initially it should be zero. icount indicates the size of the array of structures specified by ubuffer. ubuffer is the address of an array of structures of type xfs_bstat_t. Many of the elements in the structure are the same as for the stat structure. The structure has the following elements: bs_ino (inode number), bs_mode (type and mode), bs_nlink (number of links), bs_uid (user id), bs_gid (group id), bs_rdev (device value), bs_blksize (block size of the filesystem), bs_size (file size in bytes), bs_atime (access time), bs_mtime (modify time), bs_ctime (inode change time), bs_blocks (number of blocks used by the file), bs_xflags (extended flags), bs_extsize (extent size), bs_extents (number of extents), bs_gen (generation count), bs_projid_lo (project id - low word), bs_projid_hi (project id - high word, used when projid32bit feature is enabled), bs_dmevmask (DMIG event mask), bs_dmstate (DMIG state information), and bs_aextents (attribute extent count). ocount is a pointer to a count of returned values, filled in by the call. An output ocount value of zero means that the inode table has been exhausted.

XFS_IOC_FSBULKSTAT_SINGLE

This interface is a variant of the XFS_IOC_FSBULKSTAT interface, used to obtain information about a single inode. for an open file in the filesystem of interest. The same structure is used to pass information in and out of the kernel, except no output count parameter is used (should be initialized to zero). An error is returned if the inode number is invalid.

XFS_IOC_THAW
XFS_IOC_FREEZE
XFS_IOC_GET_RESBLKS
XFS_IOC_SET_RESBLKS
XFS_IOC_FSGROWFSDATA
XFS_IOC_FSGROWFSLOG
XFS_IOC_FSGROWFSRT

XFS_IOC_FSCOUNTS

These interfaces are used to implement various filesystem internal operations on XFS filesystems. For XFS_IOC_FSGEOMETRY (get filesystem mkfs time information), the output structure is of type xfs_fsop_geom_t. For XFS_FS_COUNTS (get filesystem dynamic global information), the output structure is of type xfs_fsop_counts_t. The remainder of these operations will not be described further as they are not of general use to applications.