Smokeping_probes_EchoPingHttps (3) - Linux Manuals

Smokeping_probes_EchoPingHttps: an echoping(1) probe for SmokePing

Command to display Smokeping_probes_EchoPingHttps manual in Linux: $ man 3 Smokeping_probes_EchoPingHttps

NAME

Smokeping::probes::EchoPingHttps - an

echoping(1) probe for SmokePing

OVERVIEW

Measures HTTPS (HTTP over SSL) roundtrip times (web servers and caches) for SmokePing.

SYNOPSIS

 *** Probes ***

 +EchoPingHttps

 binary = /usr/bin/echoping
 forks = 5
 offset = 50%
 step = 300

 # The following variables can be overridden in each target section
 accept_redirects = yes
 extraopts = -some-letter-the-author-did-not-think-of
 ignore_cache = yes
 ipversion = 4
 pings = 5
 port = 80
 priority = 6
 prot = 3443
 revalidate_data = no
 timeout = 20
 tos = 0xa0
 url = /
 waittime = 1

 # [...]

 *** Targets ***

 probe = EchoPingHttps # if this should be the default probe

 # [...]

 + mytarget
 # probe = EchoPingHttps # if the default probe is something else
 host = my.host
 accept_redirects = yes
 extraopts = -some-letter-the-author-did-not-think-of
 ignore_cache = yes
 ipversion = 4
 pings = 5
 port = 80
 priority = 6
 prot = 3443
 revalidate_data = no
 timeout = 20
 tos = 0xa0
 url = /
 waittime = 1

DESCRIPTION

As EchoPingHttp(3pm), but SSL-enabled.

VARIABLES

Supported probe-specific variables:

binary

The location of your echoping binary.

Default value: /usr/bin/echoping

forks

Run this many concurrent processes at maximum

Example value: 5

Default value: 5

offset

If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe-specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT influence the rrds itself, it is just a matter of when data acqusition is initiated. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 50%

step

Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 300

Supported target-specific variables:

accept_redirects

The echoping(1) ``-R'' option: Accept HTTP status codes 3xx (redirections) as normal responses instead of treating them as errors. Note that this option is only available starting with Echoping 6.

Enabled if the value is anything other than 'no' or '0'.

Example value: yes

extraopts

Any extra options specified here will be passed unmodified to echoping(1).

Example value: -some-letter-the-author-did-not-think-of

ignore_cache

The echoping(1) ``-A'' option: force the proxy to ignore the cache. Enabled if the value is anything other than 'no' or '0'.

Example value: yes

ipversion

The IP protocol used. Possible values are ``4'' and ``6''. Passed to echoping(1) as the ``-4'' or ``-6'' options.

Example value: 4

pings

How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have to delete the old RRD files or somehow convert them.

Example value: 5

port

The TCP port to use.

Example value: 80

priority

The ``-p'' echoping(1) option.

Example value: 6

prot

Example value: 3443

Default value: 443

revalidate_data

The echoping(1) ``-a'' option: force the proxy to revalidate data with original server. Enabled if the value is anything other than 'no' or '0'.

Example value: no

timeout

The ``-t'' echoping(1) option.

Example value: 20

Default value: 10

tos

The ``-P'' echoping(1) option.

Example value: 0xa0

url

The URL to be requested from the web server or cache. Can be either relative (/...) for web servers or absolute (http://...) for caches.

Default value: /

waittime

The ``-w'' echoping(1) option.

Example value: 1

AUTHORS

Niko Tyni <ntyni [at] iki.fi>

NOTES

You should consider setting a lower value for the "pings" variable than the default 20, as repetitive URL fetching may be quite heavy on the server.