tset (1) - Linux Manuals
tset: terminal initialization
NAME
tset, reset - terminal initialization
SYNOPSIS
tset [-IQVcqrsw] [-] [-e ch] [-i ch] [-k ch] [-m mapping] [terminal]reset [-IQVcqrsw] [-] [-e ch] [-i ch] [-k ch] [-m mapping] [terminal]
DESCRIPTION
tset - initialization
This program initializes terminals.
First, tset retrieves the current terminal mode settings
for your terminal.
It does this by successively testing
.IP • 4
the standard error,
.IP • 4
standard output,
.IP • 4
standard input and
.IP • 4
ultimately ``/dev/tty''
to obtain terminal settings. Having retrieved these settings, tset remembers which file descriptor to use when updating settings.
Next, tset determines the type of terminal that you are using. This determination is done as follows, using the first terminal type found.
1. The terminal argument specified on the command line.
2. The value of the TERM environmental variable.
3. (BSD systems only.) The terminal type associated with the standard error output device in the /etc/ttys file. (On System-V-like UNIXes and systems using that convention, getty does this job by setting TERM according to the type passed to it by /etc/inittab.)
4. The default terminal type, ``unknown''.
If the terminal type was not specified on the command-line, the -m option mappings are then applied (see the section TERMINAL TYPE MAPPING for more information). Then, if the terminal type begins with a question mark (``?''), the user is prompted for confirmation of the terminal type. An empty response confirms the type, or, another type can be entered to specify a new type. Once the terminal type has been determined, the terminal description for the terminal is retrieved. If no terminal description is found for the type, the user is prompted for another terminal type.
Once the terminal description is retrieved,
.IP • 4
if the ``-w'' option is enabled, tset may update
the terminal's window size.
-
If the window size cannot be obtained from the operating system,
but the terminal description (or environment, e.g., LINES
and COLUMNS variables specify this),
use this to set the operating system's notion of the window size.
.IP • 4 if the ``-c'' option is enabled, the backspace, interrupt and line kill characters (among many other things) are set
.IP • 4 unless the ``-I'' option is enabled, the terminal and tab initialization strings are sent to the standard error output, and tset waits one second (in case a hardware reset was issued).
.IP • 4 Finally, if the erase, interrupt and line kill characters have changed, or are not set to their default values, their values are displayed to the standard error output.
reset - reinitialization
When invoked as reset, tset sets the terminal
modes to ``sane'' values:
.IP • 4
sets cooked and echo modes,
.IP • 4
turns off cbreak and raw modes,
.IP • 4
turns on newline translation and
.IP • 4
resets any unset special characters to their default values
before doing the terminal initialization described above. Also, rather than using the terminal initialization strings, it uses the terminal reset strings.
The reset command is useful
after a program dies leaving a terminal in an abnormal state:
.IP • 4
you may have to type
(the line-feed character is normally control-J) to get the terminal
to work, as carriage-return may no longer work in the abnormal state.
The options are as follows:
The arguments for the -e, -i, and -k
options may either be entered as actual characters
or by using the ``hat''
notation, i.e., control-h may be specified as ``^H'' or ``^h''.
If neither -c or -w is given, both options are assumed.
When the -s option is specified, the commands to enter the information
into the shell's environment are written to the standard output.
If
the SHELL environmental variable ends in ``csh'', the commands
are for csh, otherwise, they are for sh.
Note, the csh commands set and unset the shell variable
noglob, leaving it unset.
The following line in the .login
or .profile files will initialize the environment correctly:
The -m options maps
from some set of conditions to a terminal type, that is, to
tell tset
``If I'm on this port at a particular speed,
guess that I'm on that kind of terminal''.
The argument to the -m option consists of an optional port type, an
optional operator, an optional baud rate specification, an optional
colon (``:'') character and a terminal type.
The port type is a
string (delimited by either the operator or the colon character).
The operator may be any combination of
``>'',
``<'',
``@'',
and ``!'';
``>'' means greater than,
``<'' means less than,
``@'' means equal to and
``!'' inverts the sense of the test.
The baud rate is specified as a number and is compared with the speed
of the standard error output (which should be the control terminal).
The terminal type is a string.
If the terminal type is not specified on the command line, the -m
mappings are applied to the terminal type.
If the port type and baud
rate match the mapping, the terminal type specified in the mapping
replaces the current type.
If more than one mapping is specified, the
first applicable mapping is used.
For example, consider the following mapping: dialup>9600:vt100.
The port type is dialup , the operator is >, the baud rate
specification is 9600, and the terminal type is vt100.
The result of
this mapping is to specify that if the terminal type is dialup,
and the baud rate is greater than 9600 baud, a terminal type of
vt100 will be used.
If no baud rate is specified, the terminal type will match any baud rate.
If no port type is specified, the terminal type will match any port type.
For example, -m dialup:vt100 -m :?xterm
will cause any dialup port, regardless of baud rate, to match the terminal
type vt100, and any non-dialup port type to match the terminal type ?xterm.
Note, because of the leading question mark, the user will be
queried on a default port as to whether they are actually using an xterm
terminal.
No whitespace characters are permitted in the -m option argument.
Also, to avoid problems with meta-characters, it is suggested that the
entire -m option argument be placed within single quote characters,
and that csh users insert a backslash character (``\'') before
any exclamation marks (``!'').
A reset command appeared in 1BSD (March 1978), written by Kurt Shoens.
This program set the erase and kill characters
to ^H (backspace) and @ respectively.
Mark Horton improved that in 3BSD (October 1979), adding
intr, quit, start/stop and eof characters
as well as changing the program to avoid modifying any user settings.
That version of reset did not use the termcap database.
A separate tset command was provided in 1BSD by Eric Allman,
using the termcap database.
Allman's comments in the source code indicate
that he began work in October 1977,
continuing development over the next few years.
According to comments in the source code,
the tset program was modified in September 1980,
to use logic copied from the 3BSD ``reset''
when it was invoked as reset.
This version appeared in 4.1cBSD, late in 1982.
Other developers (e.g., Keith Bostic and Jim Bloom)
continued to modify tset until 4.4BSD was released in 1993.
The ncurses implementation
was lightly adapted from the 4.4BSD sources for a terminfo environment by Eric
S. Raymond <esr [at] snark.thyrsus.com>.
Neither IEEE Std 1003.1/The Open Group Base Specifications Issue 7
(POSIX.1-2008) nor
X/Open Curses Issue 7 documents tset or reset.
The AT&T tput utility (AIX, HPUX, Solaris)
incorporated the terminal-mode manipulation as well as termcap-based features
such as resetting tabstops from tset in BSD (4.1c),
presumably with the intention of making tset obsolete.
However, each of those systems still provides tset.
In fact, the commonly-used reset utility
is always an alias for tset.
The tset utility provides for backward-compatibility with BSD
environments (under most modern UNIXes, /etc/inittab and getty(8)
can set TERM appropriately for each dial-up line; this obviates what was
tset's most important use).
This implementation behaves like 4.4BSD
tset, with a few exceptions specified here.
A few options are different
because the TERMCAP variable
is no longer supported under terminfo-based ncurses:
There was an undocumented 4.4BSD feature
that invoking tset via a link named
``TSET'' (or via any other name beginning with an upper-case letter)
set the terminal to use upper-case only.
This feature has been omitted.
The -A, -E, -h, -u and -v
options were deleted from the tset
utility in 4.4BSD.
None of them were documented in 4.3BSD and all are
of limited utility at best.
The -a, -d, and -p options are similarly
not documented or useful, but were retained as they appear to be in
widespread use.
It is strongly recommended that any usage of these
three options be changed to use the -m option instead.
The -a, -d, and -p options
are therefore omitted from the usage summary above.
Very old systems, e.g., 3BSD, used a different terminal driver which
was replaced in 4BSD in the early 1980s.
To accommodate these older systems, the 4BSD tset provided a
-n option to specify that the new terminal driver should be used.
This implementation does not provide that choice.
It is still permissible to specify the -e, -i,
and -k options without arguments,
although it is strongly recommended that such usage be fixed to
explicitly specify the character.
As of 4.4BSD,
executing tset as reset no longer implies the -Q option.
Also, the interaction between the - option and the terminal
argument in some historic implementations of tset has been removed.
The -c and -w options are not found in earlier implementations.
However, a different window size-change feature was provided in 4.4BSD.
Obtaining the window size from the terminal description is common to
both implementations, but considered obsolescent.
Its only practical use is for hardware terminals.
Generally speaking, a window size would be unset only if there were
some problem obtaining the value from the operating system
(and setupterm would still fail).
For that reason, the LINES and COLUMNS environment variables
may be useful for working around window-size problems.
Those have the drawback that if the window is resized,
those variables must be recomputed and reassigned.
To do this more easily, use the resize(1) program.
This describes ncurses
version 6.3 (patch 20211021).
.IP • 4
Also, the terminal will often not echo the command.
OPTIONS
SETTING THE ENVIRONMENT
It is often desirable to enter the terminal type and information about
the terminal's capabilities into the shell's environment.
This is done using the -s option.
TERMINAL TYPE MAPPING
When the terminal is not hardwired into the system (or the current
system information is incorrect) the terminal type derived from the
/etc/ttys file or the TERM environmental variable is often
something generic like network, dialup, or unknown.
When tset is used in a startup script it is often desirable to
provide information about the type of terminal used on such ports.
HISTORY
COMPATIBILITY
.IP • 4
The -S option of BSD tset no longer works;
it prints an error message to the standard error and dies.
.IP • 4
The -s option only sets TERM, not TERMCAP.
.IP • 4
In 4.4BSD, tset uses the window size from the termcap description
to set the window size if tset is not able to obtain the window
size from the operating system.
.IP • 4
In ncurses, tset obtains the window size using
setupterm, which may be from
the operating system,
the LINES and COLUMNS environment variables or
the terminal description.
ENVIRONMENT
The tset command uses these environment variables:
FILES
SEE ALSO
csh(1),
sh(1),
stty(1),
curs_terminfo(3X),
tty(4),
terminfo(5),
ttys(5),
environ(7)