gst-launch-1.0 (1) - Linux Manuals
gst-launch-1.0: build and run a GStreamer pipeline
NAME
gst-launch-1.0 - build and run a GStreamer pipeline
SYNOPSIS
gst-launch-1.0 [OPTION...] PIPELINE-DESCRIPTIONDESCRIPTION
gst-launch-1.0 is a tool that builds and runs basic GStreamer pipelines.
In simple form, a PIPELINE-DESCRIPTION is a list of elements separated by exclamation marks (!). Properties may be appended to elements, in the form property=value. A "preset" can also be set using the @preset=<preset name> syntax.
For a complete description of possible PIPELINE-DESCRIPTIONS see the section pipeline description below or consult the GStreamer documentation.
Please note that gst-launch-1.0 is primarily a debugging tool for developers and users. You should not build applications on top of it. For applications, use the gst_parse_launch() function of the GStreamer API as an easy way to construct pipelines from pipeline descriptions.
OPTIONS
gst-launch-1.0 accepts the following options:- --help
- Print help synopsis and available FLAGS
- -v, --verbose
- Output status information and property notifications
- -q, --quiet
- Do not print any progress information
- -m, --messages
- Output messages posted on the pipeline's bus
- -t, --tags
- Output tags (also known as metadata)
- -e, --eos-on-shutdown
- Force an EOS event on sources before shutting the pipeline down. This is useful to make sure muxers create readable files when a muxing pipeline is shut down forcefully via Control-C.
- -i, --index
- Gather and print index statistics. This is mostly useful for playback or recording pipelines.
- -f, --no-fault
- Do not install a fault handler
- -T, --trace
- Print memory allocation traces. The feature must be enabled at compile time to work.
- --no-position
- Do not print current position of pipeline. If this option is unspecified, the position will be printed when stdout is a TTY. To enable printing position when stdout is not a TTY, use "force-position" option.
- --force-position
- Allow printing current position of pipeline even if stdout is not a TTY. This option has no effect if the "no-position" option is specified.
GSTREAMER OPTIONS
gst-launch-1.0 also accepts the following options that are common to all GStreamer applications:- --gst-version
- Prints the version string of the GStreamer core library.
- --gst-fatal-warnings
- Causes GStreamer to abort if a warning message occurs. This is equivalent to setting the environment variable G_DEBUG to 'fatal_warnings' (see the section environment variables below for further information).
- --gst-debug=STRING
-
A comma separated list of category_name:level pairs to specify debugging levels
for each category. Level is in the range 0-9 where 0 will show no messages, and
9 will show all messages. The wildcard * can be used to match category names.
Note that the order of categories and levels is important, wildcards at the
end may override levels set earlier. The log levels are: 1=ERROR, 2=WARNING,
3=FIXME, 4=INFO, 5=DEBUG, 6=LOG, 7=TRACE, 9=MEMDUMP. Since GStreamer 1.2 one
can also use the debug level names, e.g. --gst-debug=*sink:LOG. A full
description of the various debug levels can be found in the GStreamer core
library API documentation, in the "Running GStreamer Applications" section.
Use --gst-debug-help to show category names
Example: GST_CAT:5,GST_ELEMENT_*:3,oggdemux:5
- --gst-debug-level=LEVEL
- Sets the threshold for printing debugging messages. A higher level will print more messages. The useful range is 0-9, with the default being 0. Level 6 (LOG level) will show all information that is usually required for debugging purposes. Higher levels are only useful in very specific cases. See above for the full list of levels.
- --gst-debug-no-color
- GStreamer normally prints debugging messages so that the messages are color-coded when printed to a terminal that handles ANSI escape sequences. Using this option causes GStreamer to print messages without color. Setting the GST_DEBUG_NO_COLOR environment variable will achieve the same thing.
- --gst-debug-color-mode
- GStreamer normally prints debugging messages so that the messages are color-coded when printed to a terminal that handles ANSI escape sequences (on *nix), or uses W32 console API to color the messages printed into a console (on W32). Using this option causes GStreamer to print messages without color ('off' or 'disable'), print messages with default colors ('on' or 'auto'), or print messages using ANSI escape sequences for coloring ('unix'). Setting the GST_DEBUG_COLOR_MODE environment variable will achieve the same thing.
- --gst-debug-disable
- Disables debugging.
- --gst-debug-help
- Prints a list of available debug categories and their default debugging level.
- --gst-plugin-spew
- GStreamer info flags to set Enable printout of errors while loading GStreamer plugins
- --gst-plugin-path=PATH
- Add directories separated with ':' to the plugin search path
- --gst-plugin-load=PLUGINS
-
Preload plugins specified in a comma-separated list. Another way to specify
plugins to preload is to use the environment variable GST_PLUGIN_PATH
PIPELINE DESCRIPTION
A pipeline consists elements and links. Elements can be put into bins of different sorts. Elements, links and bins can be specified in a pipeline description in any order.
Elements
ELEMENTTYPE [PROPERTY1 ...]
Creates an element of type ELEMENTTYPE and sets the PROPERTIES.
Properties
PROPERTY=VALUE ...
Sets the property to the specified value. You can use gst-inspect-1.0(1) to
find out about properties and allowed values of different elements.
Enumeration properties can be set by name, nick or value.
Presets
@preset=<preset name> ...
Sets the preset on the element. you can use gst-inspect-1.0(1) to find out what presets are available for a specific element.
Bins
[BINTYPE.] ( [PROPERTY1 ...] PIPELINE-DESCRIPTION )
Specifies that a bin of type BINTYPE is created and the given properties are set. Every element between the braces is put into the bin. Please note the dot that has to be used after the BINTYPE. You will almost never need this functionality, it is only really useful for applications using the gst_launch_parse() API with 'bin' as bintype. That way it is possible to build partial pipelines instead of a full-fledged top-level pipeline.
Links
[[SRCELEMENT].[PAD1,...]] ! [[SINKELEMENT].[PAD1,...]] [[SRCELEMENT].[PAD1,...]] ! CAPS ! [[SINKELEMENT].[PAD1,...]] [[SRCELEMENT].[PAD1,...]] : [[SINKELEMENT].[PAD1,...]] [[SRCELEMENT].[PAD1,...]] : CAPS : [[SINKELEMENT].[PAD1,...]]
Links the element with name SRCELEMENT to the element with name SINKELEMENT,
using the caps specified in CAPS as a filter.
Names can be set on elements with the name property. If the name is omitted, the
element that was specified directly in front of or after the link is used. This
works across bins. If a padname is given, the link is done with these pads. If
no pad names are given all possibilities are tried and a matching pad is used.
If multiple padnames are given, both sides must have the same number of pads
specified and multiple links are done in the given order.
So the simplest link is a simple exclamation mark, that links the element to
the left of it to the element right of it.
Linking using the : operator attempts to link all possible pads between
the elements
Caps
MEDIATYPE [, PROPERTY[, PROPERTY ...]]] [; CAPS[; CAPS ...]]
Creates a capability with the given media type and optionally with given properties. The media type can be escaped using " or '. If you want to chain caps, you can add more caps in the same format afterwards.
Properties
NAME=[(TYPE)]VALUE
in lists and ranges: [(TYPE)]VALUE
Sets the requested property in capabilities. The name is an alphanumeric value
and the type can have the following case-insensitive values:
- i or int for integer values or ranges
- f or float for float values or ranges
- b, bool or boolean for boolean values
- s, str or string for strings
- fraction for fractions (framerate, pixel-aspect-ratio)
- l or list for lists
If no type was given, the following order is tried: integer, float, boolean,
string.
Integer values must be parsable by strtol(), floats by strtod(). FOURCC values may
either be integers or strings. Boolean values are (case insensitive) yes,
no, true or false and may like strings be escaped with " or '.
Ranges are in this format: [ VALUE, VALUE ]
Lists use this format: { VALUE [, VALUE ...] }
PIPELINE EXAMPLES
The examples below assume that you have the correct plug-ins available. In general, "pulsesink" can be substituted with another audio output plug-in such as "alsasink" or "osxaudiosink" Likewise, "xvimagesink" can be substituted with "ximagesink", "glimagesink", or "osxvideosink". Keep in mind though that different sinks might accept different formats and even the same sink might accept different formats on different machines, so you might need to add converter elements like audioconvert and audioresample (for audio) or videoconvert (for video) in front of the sink to make things work.
Audio playback
Play the mp3 music file "music.mp3" using a libmpg123-based plug-in and
output to an Pulseaudio device
Play an Ogg Vorbis format file
Play an mp3 file or an http stream using GIO
Use GIO to play an mp3 file located on an SMB server
Format conversion
Convert an mp3 music file to an Ogg Vorbis file
Convert to the FLAC format
Other
Plays a .WAV file that contains raw audio data (PCM).
Convert a .WAV file containing raw audio data into an Ogg Vorbis or mp3 file
Rips all tracks from compact disc and convert them into a single mp3 file
Rips track 5 from the CD and converts it into a single mp3 file
Using gst-inspect-1.0(1), it is possible to discover settings like the above
for cdparanoiasrc that will tell it to rip the entire cd or only tracks of it.
Alternatively, you can use an URI and gst-launch-1.0 will find an element (such as
cdparanoia) that supports that protocol for you, e.g.:
Records sound from your audio input and encodes it into an ogg file
Video
Display only the video portion of an MPEG-1 video file, outputting to
an X display window
Display the video portion of a .vob file (used on DVDs), outputting to
an SDL window
Play both video and audio portions of an MPEG movie
Play an AVI movie with an external text subtitle stream
This example also shows how to refer to specific pads by name if an element
(here: textoverlay) has multiple sink or source pads.
Play an AVI movie with an external text subtitle stream using playbin
Network streaming
Stream video using RTP and network elements.
This command would be run on the transmitter
Use this command on the receiver
Diagnostic
Generate a null stream and ignore it (and print out details).
Generate a pure sine tone to test the audio output
Generate a familiar test pattern to test the video output
Automatic linking
You can use the decodebin element to automatically select the right elements to get a working pipeline.
Play any supported audio format
Play any supported video format with video and audio output. Threads are used
automatically. To make this even easier, you can use the playbin element:
Filtered connections
These examples show you how to use filtered caps.
Show a test image and use the YUY2 or YV12 video format for this.
Record audio and write it to a .wav file. Force usage of signed 16 to 32 bit
samples and a sample rate between 32kHz and 64KHz.
ENVIRONMENT VARIABLES
- GST_DEBUG
- Comma-separated list of debug categories and levels (e.g. GST_DEBUG=totem:4,typefind:5). '*' is allowed as a wildcard as part of debug category names (e.g. GST_DEBUG=*sink:6,*audio*:6). Since 1.2.0 it is also possible to specify the log level by name (1=ERROR, 2=WARN, 3=FIXME, 4=INFO, 5=DEBUG, 6=LOG, 7=TRACE, 9=MEMDUMP) (e.g. GST_DEBUG=*audio*:LOG)
- GST_DEBUG_NO_COLOR
- When this environment variable is set, coloured debug output is disabled.
- GST_DEBUG_DUMP_DOT_DIR
-
When set to a filesystem path, store 'dot' files of pipeline graphs there.
These can then later be converted into an image using the 'dot' utility from
the graphviz set of tools, like this: dot foo.dot -Tsvg -o foo.svg (png or jpg
are also possible as output format). There is also a utility called 'xdot'
which allows you to view the .dot file directly without converting it first.
When the pipeline changes state through NULL to PLAYING and back to NULL, a dot file is generated on each state change. To write a snapshot of the pipeline state, send a SIGHUP to the process. - GST_REGISTRY
- Path of the plugin registry file. Default is ~/.cache/gstreamer-1.0/registry-CPU.bin where CPU is the machine/cpu type GStreamer was compiled for, e.g. 'i486', 'i686', 'x86-64', 'ppc', etc. (check the output of "uname -i" and "uname -m" for details).
- GST_REGISTRY_UPDATE
- Set to "no" to force GStreamer to assume that no plugins have changed, been added or been removed. This will make GStreamer skip the initial check whether a rebuild of the registry cache is required or not. This may be useful in embedded environments where the installed plugins never change. Do not use this option in any other setup.
- GST_PLUGIN_PATH
- Specifies a list of directories to scan for additional plugins. These take precedence over the system plugins.
- GST_PLUGIN_SYSTEM_PATH
- Specifies a list of plugins that are always loaded by default. If not set, this defaults to the system-installed path, and the plugins installed in the user's home directory
- GST_DEBUG_FILE
- Set this variable to a file path to redirect all GStreamer debug messages to this file. If left unset, debug messages with be output unto the standard error.
- ORC_CODE
- Useful Orc environment variable. Set ORC_CODE=debug to enable debuggers such as gdb to create useful backtraces from Orc-generated code. Set ORC_CODE=backup or ORC_CODE=emulate if you suspect Orc's SIMD code generator is producing incorrect code. (Quite a few important GStreamer plugins like videotestsrc, audioconvert or audioresample use Orc).
- G_DEBUG
- Useful GLib environment variable. Set G_DEBUG=fatal_warnings to make GStreamer programs abort when a critical warning such as an assertion failure occurs. This is useful if you want to find out which part of the code caused that warning to be triggered and under what circumstances. Simply set G_DEBUG as mentioned above and run the program in gdb (or let it core dump). Then get a stack trace in the usual way.
FILES
- ~/.cache/gstreamer-1.0/registry-*.bin
- The plugin cache; can be deleted at any time, will be re-created automatically when it does not exist yet or plugins change. Based on XDG_CACHE_DIR, so may be in a different location than the one suggested.
AUTHOR
The GStreamer team at http://gstreamer.freedesktop.org/